SYMMETRIA USER MANUAL
MANUAL
1. Pull the crown out to the position III.
2. Turn the crown to set hour and minute hand.
3. After the time has been set, push the crown back to position I.
1. Pull the crown out to the position II.
2. Turn the crown counter-clockwise to set the date.
3. After the date has been set, push the crown back to position I.
Reminder: Do not set the date between 9:00pm and 3:00am, when the parts of the watch revolve with the calendar, as quick adjustment may damage internal gears and reduce service life.
1. Release spring bars at the back by pushing the pin inward.
2. Replace the strap
3. Place one end of the spring bar into the lug hole, then insert spring bars by pushing the pin inward. Make sure the spring bars snap into the lug holes.
1. Insert the strap tool into the clasp gap.
2. Gently pull down until the full clasp movement is released.
3. Adjust to suit the size of the wrist, and replace the clasp once comfortable.
1. Hook the small clasp onto the crossbar.
2. Press and close the safety clasp.
3. Fold the outer clasp to ensure the strap is securely fastened.
Reminder: After wearing, check that the clasp is secure and properly fastened.
